Armor Door

Standard Dimensions

30′ W x 29′ H

Standard Opertaing Speed

12 inch/sec up to 19 inch/sec

Operating Type

Gear driven, direct drive operator

Side Guide

Made of 10-gauge primed steel.

Inner Side Guide

Made of 10-gauge

Drum

In steel, diameter 5″ shafts in steel.

Door Curtain

Curtain panels shall be G-90-galvanized steel with baked-on acrylic prime coat and baked on acrylic finish in 6 standard colors. Additional colors available upon request.

Motor

Withbrake, with 4 poles, controlled by a variable speed drive. Power: 1 HP, 2HP, 3HP and 5HP 3phase. Protection degree NEMA 4.

Gearbox

Eurodrive In Line Operator

Detectors

An infrared photocell installed inside the side guide and detecting the presence of a pedestrian or a vehicle. Upon activation, it opens the door immediately and keeps it open as long as the presence is detected. Height of the photocell: 12” from the floor. (Optional: up to maximum 24” fromthe floor). A bottom edge detector opens the door when it hits an obstacle during the closing cycle. This detector is positioned at the bottom part of the nest.

Power Supply

Standard: single phase 208-230 VAC, three phase 208-230 VAC, three phase 460 VAC. Optional: three phase 575 VAC Frequency: 50-60 Hz. Circuit breakers to be provided by the customer: 6A for a motor of 0.74 HP; 10A for 1 HP and 16A for 2 HP.

Space Requirements

Call for headroom clearance

• Curtain made of G-90-galvanized steel with baked-on acrylic finished coat
• Sound transmission class rating 29
• Double wall construction provides an excellent U-Value of 0.51
• Infrared photocell in side guides
• Soft bottom edge
• Wireless electric bottom edge detector
• Maximum standard dimension up to 28′ x 29′
• High wind resistance
• Operating speeds from 12″ to 18″ per second
• Gear driven, direct drive operation
• Recommended for high traffic areas

• Manufacturing
• Production areas
• Transportation
• Distribution
• Automotive
• Whenever wind protection is required